We hebben er enige tijd op moeten wachten, maar nu is het eindelijk zo ver: de JBL MSC1 is binnen en kan worden uitgeleverd.
De MSC1 kan gebruikt worden met elk merk speakers, dus niet alleen met JBL LSR.
Naast de zeer overzichtelijke en duidelijke applicatie weergaven is er op de website van JBL Pro is een zeer handige video opgenomen. De video is in 6 delen en legt stap voor de stap de werking van de MSC1 uit en laat zien wat de MSC1 voor je kan doen.
The MSC1 Monitor System Controller includes essential Monitor Strip features found in large mixing consoles so you can take control of all monitoring functions from your place at the mix position.
Since the acoustics of the room can play a big part in what you hear, the MSC1 includes JBL’s highly acclaimed RMC Room Mode Correction Technology to tune your monitor system to the room. The end-result is a calibrated reference environment in which your speakers work in harmony with your room to take the guesswork out of mixing.
Features :
- Master Volume Control
- A/B Speaker Select
- A/B/C input Source Select
- Subwoofer Output with Level Control and Selectable Cross Over Frequencies
- Adjustable Low Frequency and High Frequency Speaker EQ
- Headphone Output with Volume Control
- Monitor Mute Control
- RMC On/Bypass Control
- Adjustable input gain with Signal Present and Clip indicator
- Can be used with any studio monitor system
Specifications :
- S/N, Dynamic Range: 110 dB typical A-weighted 20 Hz – 20 kHz
- Frequency Response: +0/-O.5 dB, 20 Hz – 20 kHz
- THD+N: < 0.04% A/D/A, 20 Hz – 20 kHz
- A/D, DA Converters: 24 Bit
- Internal Processing: 48 Bit, 48 kHz
- Maximum Input Level: +24 dBU 6.5mm (1/4″ TRS Inputs) +4 dBu phono (RCA Inputs)
- Maximum Output Before Clipping: +17 dBu
- Power Requirements: 12 VDC, 0.5A
- Dimensions W x D x H: 198 x 165 x 83 mm (7.8 x 6.5 x 3.25 in)
- Inputs A, B / C: 4 Balanced 1/4″ TRS 2 Unbalanced RCA
- Outputs A, B and Subwoofer: 5 Balanced 1/4″ TRS
- Headphone: Stereo 1/4″
- RMC Mic IN / OUT: 1/8″ TRS
- Computer Interface: USB 2.0
- LF EQ Frequency: 20 Hz to 1.1 kHz Shelf 32 options
- LF EQ Gain: +/- 3 dB in .25 dB increments
- HF EQ Frequency: 2.5 kHz to 17 kHz Shelf 28 options
- HF EQ Gain: +/- 3 dB in .25 dB increments
- Level: +/- 10 dB from nominal in .5 dB increments
- Selectable Crossover Frequencies: 60 Hz, 80 Hz, 120 Hz
- Polarity: 0 degrees / 180 degrees