The NT55 utilises the 1/2″ gold sputtered true condenser transducer used in the internationally renowned RDE NT5. The NT55 is a low-noise, balanced output microphone, exhibiting a wide dynamic range and full frequency response.
The NT55 circuit incorporates a three position variable PAD with 0dB, -10dB or 20dB attenuation, and a thereposition variable high-pass filter that enables you to step from a flat response to 75 or 150 Hz high pass filter.
The NT55 comes with two different condenser microphone heads to provide a wide variety of polar patterns. The NT55 is complemented with a diverse range of accessories to better facilitate positioning and attachment.
- Externally biased condenser
- Gold sputtered 1/2″ capsule
- Three position PAD – 0dB, -10dB and -20dB
- Three position High-Pass Filter – flat, 75Hz and 150Hz
- Cardioid or Omni polar pattern using interchangeable capsules
- Heavy-duty satin-nickel plated body
- Surface mount circuitry
- Low noise
- Full frequency response
Ook verkrijgbaar als enkele microfoon (RDE NT55)
| Power | P48 (48V) phantom supply |
| Acoustic Principle | Pressure gradient |
| Directional Pattern | Cardioid and Omni |
| Frequency range | 20 Hz – 20 kHz (with selectable HPF) |
| Output impedance | 100O |
| Signal noise ratio | 79 dB SPL (A – weighted per IEC651) |
| Equivalent noise | 15 dB SPL (A – weighted per IEC651) |
| Maximum SPL | 136dB SPL (@ 1kHz, 1% THD into 1KO load) (146/156 with PAD) |
| Maximum output voltage | +8dBu (@ 1kHz, 1% THD into 1KO load) |
| Sensitivity | -38 dB re 1 Volt/Pascal (12 mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Weight | 110gm |
| Dimensions | 145mmH x 20mmW x 20mmD |